Product Description

Y10 2X Motorcycle Bluetooth Helmet Intercom – 300m Rider-to-Rider Range, Bluetooth 5.3, 2000mAh Battery & IPX6 Waterproofing

🏍️ 🎧 📡 The High-Endurance Two-Rider Wireless Helmet Communication System

Meet the Y10 2X Motorcycle Bluetooth Headset Intercom—a rugged, long-lasting wireless communication system engineered for rider-to-pillion and two-rider touring, daily commuting, and all-weather motorcycling.

Equipped with upgraded Bluetooth V5.3 connectivity and a massive 2000mAh rechargeable lithium battery, the Y10 2X delivers up to 300 meters of clear rider-to-rider intercom communication alongside up to 72 hours of normal audio playback. Designed with glove-friendly physical pressure buttons, dual-device simultaneous pairing, intelligent noise reduction, and IPX6 weatherproof protection, it fits full-face, modular, open-face, half, and motocross helmets seamlessly.

📡 300m Rider Intercom, Bluetooth 5.3 & Dual-Phone Connection

  • 300m Rider-to-Rider Wireless Intercom: Enables direct, clear full-duplex voice communication between rider and passenger or two nearby motorcycles up to 300 meters apart in open line-of-sight conditions.

  • Bluetooth V5.3 & Simultaneous Dual-Device Link: Pairs with two smartphones or GPS devices at the same time, allowing instant one-button switching between turn-by-turn navigation prompts, music streaming, and hands-free calls.

  • Voice Assistant & Noise Reduction: One-touch wake-up activates Siri or Google Assistant for hands-free voice dialing and route commands, backed by built-in acoustic noise reduction for clarity at highway speeds.

🔋 Massive 2000mAh Battery Core & Fast 2.5-Hour Recharge

  • Up to 72 Hours Normal Playback / 30 Hours Call Time: High-capacity 2000mAh lithium battery provides up to 72 hours of regular usage (25 hours at maximum music volume) and 30 hours of continuous talk time.

  • Extended Standby Endurance: Offers approximately 160 hours of active standby and up to 18 months in dormant storage mode, recharging fully in 2.5 hours or less.

🛡️ IPX6 All-Weather Durability & Glove-Friendly Controls

  • IPX6 Waterproof Construction: Sealed outer housing protects internal electronics against heavy rain, wind, and road spray without performance loss.

  • Tactile Glove-Friendly Buttons: Raised physical pressure buttons ensure effortless blind operation while wearing thick winter or armored riding gloves.

  • Universal Helmet Compatibility: Supplied with interchangeable Soft and Hard microphone options to fit Full-Face, Modular, Open-Face, Half, and Motocross helmets.

⚙️ Product Specifications

Feature / Category Y10 2X Motorcycle Bluetooth Intercom Specification
Model Designation Y10 2X
Product Category Motorcycle Helmet Bluetooth Headset & Intercom System
Wireless Protocol Bluetooth V5.3 (Supports Simultaneous Dual-Device Connection)
Maximum Intercom Distance Up to 300 meters (Unobstructed line-of-sight, 2-Rider Intercom)
Battery Capacity 2000mAh Built-In Rechargeable Lithium Battery
Battery Runtime Up to 72 Hours Normal Play | 30 Hours Talk | 25 Hours Max-Volume Music
Standby & Charging Time ~160 Hours Standby (18 Months Dormant) | ≤ 2.5 Hours Charge Time
Audio Drivers & Impedance Dynamic Drivers | 32 Ohm Impedance | 100Hz–18kHz Frequency Response
Microphone & Jack Interface Detachable Soft / Hard Microphone Options | 3.5mm Audio Jack
Smart & Safety Features Voice Assistant Wake-Up, Acoustic Noise Reduction, Glove-Friendly Buttons
Waterproof Rating IPX6 Certified Waterproof
Compatible Helmet Types Full-Face, Modular, Open-Face, Half Helmet, Motocross, Universal
Unit Dimensions & Weight 85 x 35 x 20 mm (3.35 x 1.38 x 0.79 in) | 180g
Certifications CE, FCC, RoHS, CCC Certified
Origin Mainland China

📦 What’s Included

(Quantities reflect 1-Pack or 2-Pack Dual Set selection)

  • 1 or 2 x Y10 2X Bluetooth Intercom Main Unit

  • 1 or 2 x Clip-On Helmet Mounting Base

  • 1 or 2 x Helmet Speaker Set with Soft / Hard Microphone

  • 1 or 2 x USB Charging Cable

  • 1 or 2 x Velcro Speaker & Mic Installation Pad Kit

  • 1 x User Manual

🛠️ Quick-Start Operation & Helmet Setup Guide

1. Helmet Mounting & Speaker Placement

  1. Clean the left lower edge of your helmet shell and attach the mounting base using either the spring clip or the heavy-duty adhesive pad.

  2. Position the dynamic speaker pads inside the helmet's ear recesses using the included Velcro discs so they sit directly over your ears without pinching.

  3. Route the wires neatly behind the helmet liner, attach the boom (hard) mic for open-face/modular helmets or the wire (soft) mic for full-face helmets, and plug the 3.5mm connector firmly into the Y10 2X unit.

2. Smartphone & Rider-to-Rider Intercom Pairing

  1. Initial Charge: Fully charge the unit for approximately 2.5 hours before first use.

  2. Phone Pairing: Press and hold the Power/Multifunction button until the LED flashes red and blue, then select Y10 2X in your smartphone's Bluetooth menu.

  3. Two-Rider Intercom Pairing: Power on both Y10 2X units into pairing mode and press the intercom pairing button on one unit to establish the 300m wireless rider-to-rider link.

Customer Reviews

Customer Reviews

Based on 48 reviews
79%
(38)
8%
(4)
10%
(5)
0%
(0)
2%
(1)
R
Ronna Kessler

I don't know if the battery lasts long, but for now it works well. The sound is acceptable.

C
Chase Monahan

Items is exactly as it is described would recommend 👌

R
Roseanna Gutkowski

It arrived quickly, as expected, and works properly. I recommend it 100%.

L
Lashandra Hamill

Excellent audio quality and came very fast, they were super easy to pair together to work in intercom mode

K
Kimberli Kiehn

installed in LS2 Modular Advant-X helmet

Similar Products

Complementary products

    • ALWAYS FREE SHIPPING

      On all orders within the E.U. 7-15 business days delivery.

    • 100% SECURE PAYMENT

      We ensure secure and safe payment on all orders.

    • CUSTOMER SUPPORT

      Email us at [email protected] for any product or sales queries.